The 100W ERT® communication module is the latest addition to Itron’s portfolio of advanced metering devices for water utilities. View 100W ERT Documents
Whether heat, cold or solar consumption measurement is required, the multifunctional 5202 BTU Meter from Istec combines all measuring requirements in one unit and offers maximum flexibility. View 5202 BTU Meter Documents
This is a complete line of dry particulate filters but we generally stock the small 3/4 and 1" size cartridge filters. View American CRF/Kleenline Documents
Provides Three 2-Wire, Loop Powered, Optically Isolated, Precision 4-20mA Outputs Outputs for Flow Rates, Pressure or Numerous Other Control and Monitoring Applications Multiple A/O Modules can be Used View Analog Out Documents
APERVAL 101 is a pilot controlled regulator for low and medium pressure applications. APERVAL 101 is a fail-to-open regulator. View Aperval 101 Documents
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2″ (15mm), 3/4″ (20mm), 1″ (25mm), 1-1/2″ (40mm) and 2″ (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations. View Aquametro Chemical Meters Documents
The B35 Series is a high pressure, first-cut regulator designed for inlet pressures of up to 1000 PSIG and outlet pressures of up to 150 PSIG. View B35 Documents
The B42 service regulator incorporates a molded diaphragm and an increased lever ratio into a conventionally designed regulator. Literature Product Technical Bulletin One-Page Submittal Pressure Ratings Installation Guide
The B531 is designed for light to medium commercial applications where the added safety of twin sliding orifices and/or dual relief is desirable. View B531 Documents
The Itron B56 is a versatile pounds-to-pounds reducing regulator with internal relief, designed for applications requiring accurate regulation over a wide range of inlet and delivery pressures. View B56 Documents
The B57 regulator is ideally suited for use where inches of water column or pounds delivery pressure are desired for uses including utility services, small boilers, and other similar applications. View B57 Documents
The B58 regulator is ideally suited for use where inches of water column or pounds delivery pressure are desired for uses including utility services, small boilers, and other similar applications. View B58 Documents
The B838 is designed for large commercial and industrial applications where the added safety of twin sliding orifices and/or dual relief is desirable. View B838 Documents
The G4 gas meter is a remarkably small, lightweight meter ideally suited to residential submetering applications. Despite its small size, the G4 meter is incredibly accurate and reliable when measuring either natural or LP gas. The G4 is classified as a 200 cubic foot per hour (cfh), non-temperature compensated gas meter with cyclometer register. View BK-G4 Documents
The Blackline Live portal is at the core of all Blackline Safety monitoring solutions, equipping businesses with leading alert management tools, dashboards, and comprehensive configuration management of fielded devices. Blackline Live Portal Documents
Have a hot water, high volume application that requires a high degree of accuracy with low maintenance features?Then Carlon has a family of meters for you. Our hot water turbine meters are available in sizes from 3/4” to 6”, with larger sizes available upon request. View Carlon H Series Documents
When long meter life, good tolerance to contaminants, and high accuracy are needed in an economical totalizing water meter, Carlon’s MNL line of multijet meters are what you need. The MNL line has a well deserved reputation for excellence in the world of commercial, municipal, and residential water meters. The registers are easy to read and will retain their clear…
The XARTU/1-CP is designed to give pipeline operators with buried steel pipelines up-to-date operating information and data. View Cathodic Protection Documents
For monitoring of chemicals in industrial processes and in the chemical, pharmaceutical and food processing industries for totalization, batch control and rate of flow, Elster AMCO Water offers either Positive Displacement or Turbine design stainless steel meters. These meters offer exceptional accuracy (± 0.5%) and can be configured for temperatures up to 356º F (180º C). View Chemical Meters Documents
The highly flexible Istec SmartCard offers a previously unachieved level of operating convenience for recording energy costs. It guarantees fault-free, reliable reading of the registered consumption values in the simplest possible way. The SmartCard is certified in accordance with the industrial standard ISO 7816. View Chip Card Documents
The CL231 Series is a compact, cost-effective regulator designed for mid-sized commercial applications (to 7500 SCFH) which require accurate regulation at elevated pressures. CL231 Documents
The CL31 Series is designed to provide extremely accurate regulation of intermediate volumes of gas (to 4000 SCFH) at elevated pressures (1 to 20 PSIG). View CL31 Documents
The CL38 Series is designed to provide extremely accurate regulation of gas in high capacity applications with outlet pressures up to 30 psig. View CL38 Documents
We believe that filters always pay for themselves. Many gas lines have oil and water in mist or droplet form that, along with solid contaminants such as pipe scale, dirt, and rust, will damage or even destroy your downstream equipment. Use a FilterFab C-Series Coalescing Filter, and you will remove all forms of moisture and dry contamination, lengthening the life…
Eagle Research Corporation® recognizes that our customers’ needs may sometimes require more than our “standard” product offerings. To meet these needs, Eagle operates a UL Certified Panel Shop. This permits us to work with the customer from conception through installation and start up to assure that all requirements are met. View Custom Panels Documents
This Series 770 differential pressure gauge is especially suited for economic and rugged measurement and control of the pressure drop across filters, valves and equipment and for flow measurement and control. View Differential Pressure Gauge Documents
The DIVAL 500 series of spring loaded, diaphragm controlled balanced plug gas regulators are suitable for low, medium and high pressure. View Dival500 Documents
Dival 600 series pressure gas regulators are direct acting devices for low and medium pressure applications controlled by a diaphragm and counter spring. View Dival 600 Documents
The Domestic Meter Pulser is an economical and effortless way to retrofit residential and laboratory gas meters with a reliable pulse output. View Domestic Meter Pulser Documents
Digi-Read is the latest in remote reading technology, featuring a rugged design, ease of use operation and a fully integrated configuration setup menu. View DR3 Documents
We believe filters always pay for themselves. All gas lines have dry contaminants (such as pipe scale, dirt, and rust) that will damage or even destroy your downstream equipment. Using a Filterfab F-Series Dry Filter will remove all forms of dry contamination, lengthening the life of your equipment and saving thousands of dollars in maintenance costs.
The Eagle E-Series Electronic Flow Corrector is the one of many new advanced electronics offered by eagle for precise monitoring solutions. View EFC Documents
This Elster AMCO Water line of compact high precision oscillating piston oil flow meters covers a range of flows from 0.25 to 50 GPH. These meters are capable of handling light heating oil, diesel, and even gasoline. Accuracy is ± 1% throughout the operating flow range for each meter. Each meter is tested with #2 oil at 70°F to verify…
This Elster AMCO Water line of high precision oscillating piston oil flow meters covers a range of flows from 60 to 8000 GPH. These meters are capable of handling a wide viscosity range including light and medium heating oil, diesel, and even heavy heating oil. Accuracy is ±1% throughout the operating flow range for each meter. Each meter is tested…
Elster C700 oscillating piston type water meters are the most advanced design positive displacement meters available. Boasting dependability and engineering excellence, the C700 line carries the industry’s longest and broadest product warranty, assuring your utility of unparalleled performance and the highest revenue. View Elster C700 Documents
The evoQ4 is a pioneering advance in commercial water metering technology, the evoQ4 delivers unparalleled performance and functionality that meets the typical demands of four commercial meters – compounds, turbines, single jets and mag meters, as well as large positive displacement meters. View Elster evoQ4 Documents
The SM700 fluidic oscillator water meters address the global need for economic intelligent metering technology for meter sizes of 5/8″ through 1″. With no-moving parts, the SM700 is not affected by the wear and subsequent accuracy problems that are caused by particulate matter, such as sand and grit, to prevent lost revenue and offer whole life meter accuracy. Even in…
The IMAC ‘X’-Pulser is an economical pulser designed for use with the Elster-American RPM Rotary Gas Meters. View Elster-American RPM Rotary Meter Pulser Documents
The EchoStream Commercial Mesh Network’s backbone of intelligent repeaters can extend coverage to thousands of sensors across entire commercial campuses. View EN1501/EN1501XL Documents
The Inovonics Commercial Mesh Network has been specifically developed for commercial applications to provide the most cost effective solution for a wide range of applications, while setting new standards for performance and reliability in a wireless sensor network. View EN4000 Documents
The Eagle E-Series Electronic Pressure Recorder is the one of many new advanced electronics offered by eagle for precise monitoring solutions. View EPR Documents
Extra Serial Port for the E3 Processor Serial Ports (RS232 / RS485) Baud Rates up to 155,200 Up to (4) E-ESP Modules Used with E3 Processor Board (4) Extra Serial Ports
(2) Serial Ports (RS232 / RS485) (4) Analog Inputs (4-20ma / 1-5VDC) (1) RTD (Temperature Probe) (2) Form A / Form C Pulse Input (3) Digital Outputs (3) Digital Inputs OPTO 22 G4 Package Slots (1) Analog Output (4-20ma/1-5VDC)
F-1100 Series turbine flow meters are suitable for pipe sizes ranging from 1¼” to 36″ (1″ for copper). The single turbine flow meters are ideal for smaller pipes and for larger pipes with enough straight pipe to provide fully conditioned flow. View F-1100 Single Turbine Documents
F-1200 Series Turbine Flow Meters are suitable for pipe sizes ranging from 2½” to 36″. Patented Dual Turbine Meters provide partial compensation for irregular flow conditions caused by inadequate straight pipe runs. View F-1200 Bi-Directional Documents
F-1300 Series Inline Turbine Flow Meters are available with copper sweat or NPT process connections for pipe sizes of ¾” and 1″. Inline flow meters provide an effective low cost option for measuring flow in small pipes. View F-1300 In-Line Turbine Documents
F-1300 Series Inline Turbine Flow Meters are available with copper sweat or NPT process connections for pipe sizes of ¾” and 1″. Inline flow meters provide an effective low cost option for measuring flow in small pipes. View F-1300 In-Line Turbine Documents
The F-3000 Inline Electromagnetic Flow Meters are available in sizes from ¼” to 72″ and will be factory-configured for ease of installation and start-up. View F-3100 Electromagnetic Documents
The F-3000 Inline Electromagnetic Flow Meters are available in sizes from ¼” to 72″ and will be factory-configured for ease of installation and start-up. Typical applications include monitoring of cooling water, heating water, condenser water and domestic water. View F-3200 Electromagnetic Documents
The F-3500 Insertion Electromagnetic Flow Meter is suitable for use in pipes ranging in size from 3″ to 36″ in diameter. It features ONICON’s unique hot tap design that allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow. The low maintenance design is provided ready-to-use without the need for field…
The cutting-edge technology for ultimate measurement accuracy: the new ultra-sonic compact gas meter FLOWSIC500 from SICK enables highly accurate measurement in natural gas distribution.
Many years of experience and continuous improvement of the measuring technique have led to a new generation of ultrasonic gas flow meters – the FLOWSIC600. View FLOWSIC600 Documents
The Sick FLOWSIC600-XT Ultrasonic Gas meter is an extremely accurate meter with long-term stability typically used in custody transfer and process applications. View FLOWSIC600-XT Documents
Although the Dattus Meter has been discontinued, Meter Valve & Control still offers meters parts and calibration. Literature Identifying Dattus battery types Changing Batteries in Dattus DM2 meters Dattus III Battery Replacement
The G7x with bridge is a two piece lone worker monitoring system, where the belt worn G7x communicates with the bridge via a 900 MHz signal. G7c Documents
Blackline Safety's G7x uses 3G cellular and satellite networks to connect your team to real people. G7x confidently accounts for everyone’s wellbeing and whereabouts in real-time to equip live monitoring personnel when someone needs a hand, in even the most remote locations. G7x Documents
The Gallus 2000 uses the positive displacement diaphragm principle. Its design consists of a twin-chamber diaphragm-measuring unit. View Gallus 20000 Documents
These strainers are designed to protect downstream equipment from loose scale, weld slag, grit and other foreign material. View Gasket Strainers Documents
Pietro Fiorentini’s GOVERNOR line of gas regulators are designed to comply with the latest CSA and international standards for regulators suitable for indoor and outdoor installations with no modifications. View Governor Series Documents
The index lock box is a custom fabricated heavy gauge index box with a universal mounting pattern to eliminate tampering and vandalism to vertically mounted indexes. View Index Lock Box Documents
IMAC instrument filter dryers and cartridge refills provide cost effective instrument filtration for pneumatic controllers, heaters, enclosure systems, and other instruments. View High Pressure Instrument Filter Dryers Documents
Meter, Valve and Control is proud to offer the Flo-Dri and NGS Drying Systems in our instrument filter dryers. View Low Pressure Instrument Filter Dryers Documents
Istec’s WATER Meters are ideal for all Metering and Performance Verification applications. We stock from 1/2” through 12” meters for most metering applications. No job is too small or too large. View Istec 1700 Series Documents
ISTEC’s 1800 Series water meters are ideal for water metering and performance verification applications. These hardy meters are also suitable for condensation application up to 248°F and 232 psi. View Istec 1800 Series Documents
ISTEC’s 1800 Series water meters are ideal for water metering & performance verification applications. These hardy meters are also suitable for condensation application up to 248°F and 232 psi. View Istec 1800 Series Documents
ISTEC’s 1800 Series water meters are ideal for water metering and performance verification applications. These hardy meters are also suitable for condensation application up to 248°F and 232 psi. We stock from 1/2″ through 6″ meters (with up to 12″ as special order) and all come standard with a pulse output.
